Pool Protect Opening Kit – Deluxe

META STAIN PREVENT :

Concentrated multi-action treatment for pools. A single product for preventing and correcting the most common water problems, such as cloudy water and metals, as well as built up organic waste and phosphates.

ALGI KILL 600:

Controls algae in swimming pool water. Polyquaternary compound. Non foaming, non metallic. Effective on black, green, mustard and other algae. Helps flocculate dead algae and sedimentation to pool bottom for easy cleaning. Effective at any pH. Helps reduce chlorine demand.

AVERAGE 70,000 LITRES POOL (16′ x 32′ INGROUND)

1. Remove pool cover and ice buffers (see note below).

2. Reinstall and/or close all drain plugs. Flush and drain all piping to waste.

3. Remove any surface stains and thoroughly clean away winter water line with AMAZE.

4. Reconnect chemical feeding equipment, if any.

5. Fill pool to normal operating level. While pool is filling add in META STAIN PREVENT to prevent staining, scaling or water discoloration.

6. Backwash and thoroughly clean filter with FILTER CLEANER (following directions on bottle), then put filter into operation.

7. With pump and filter operating broadcast OXY PRO over surface of pool.

8.  a)Wait 12 hours then add in ALGIKILL 600 following directions on the bottle.

      b) Add 1L POOL MAGIC – Phos free

9. The next day test chlorine level. If level is between 1-2 ppm commence regular chlorine program, if under 1 ppm, shock pool.

10. If you have a salt water pool we strongly recommend you purchase Salt One as part of your opening. This product will help prolong the life of your equipment.

After operating pump and filter continuously for 48 to 72 hours, take a water sample to YOUR IPG DEALER for a complete WATER ANALYSIS. If necessary make adjustments to pH, ALKALINITY, HARDNESS and STABILIZER as recommended by your IPG DEALER.

Allow pool water to filter continuously for first week backwashing and cleaning filter as required.